Align Multi-function Tester RCE-MT8 [K10402A]
Περιγραφή
Εικόνες
Αποστολή σε Φίλο σας
Features:
1.For RC model electrical equipment diagnostic and measurement use.
2.High precision display of individual cell voltage for 2 to 8S lithium packs.In addition to individual cell voltage, it also displays total pack voltage as well as percentage of pack's remaining capacity.
3.Displays serial cell count in a pack, as well as highest and lowest cell voltage, and the voltage difference.
4.Servo diagnostic feature. Displays BEC output voltage and receiver signal output.
5.Digital tachometer to display 2 to 7 propeller rotating speed as well as memory for highest RPM attained.
6.Reverse polarity protection for cell input.
Specifications:
●Voltage measurement range: 2-8S Lipo/Li-ion.
●Voltage display resolution: 0.001V
●PPM manual signal output 2270us-770us
●PPM automatic signal output: 1520us ±(120-630us)
●Number of propeller measurable: 2 to 7
●Propeller rotating range: 1-60000RPM, measurement distance: 5-15cm
●BEC input voltage range: 4-7v
●Battery input terminal spec: 2.5mm pitch pins, compatible with Align compatible balancing plugs.
Illustration 1:Measure individual cell voltage for 2 to 8S lithium packs.(Align balance plug)
Illustration 2:When discharging the battery, you can connect the tester to the battery balancing plug for monitoring the cell voltages are average.
Illustration 3: Including Pitch 2.0mm TP 2~8S balance adapter.
Illustration 4:Servo diagnostic feature.
Illustration 5:Receiver signal output detector.
Illustration 6:This device can use to control ESC and measure the propeller RPM.
Includes/Requires:
Includes:
●Balance adapter D x 1
(Compatible with TP balance plug of same specification)
|
|
|
|
|
