BizGreece

    Αρχική σελίδα    ΚΑΤΑΛΟΓΟΣ   Ο ΛΟΓΑΡΙΑΣΜΟΣ ΜΟΥ   ΣΤΟ ΚΑΛΑΘΙ    
  
 
 
ΑΝΑΖΗΤΗΣΗ:
 
 Το καλάθι είναι άδειο
 ( ΣΤΟ ΚΑΛΑΘΙ   ΤΑΜΕΙΟ )
 

Scorpion HK 5035-380 XXtreme edition


Προβολή Μεγαλύτερης Εικόνας

Τιμή Τιμοκαταλόγου: 370.00
Η Τιμή μας: 299.00 (Τιμή με Φ.Π.Α.)
Κερδίζετε : 71.00 (19%)
10 ημέρες
14950 points

 
Περιγραφή
Αποστολή σε Φίλο σας
Κριτικές
Scorpion Motor HK-5035-380 (XXtreme Edition) The Scorpion HKIII-5035-380 motor will provide all the power you need for the larger 800 class electric helicopters, those massive electric powered scale projects or for your workhorse camera platform helicopters that need to be able to lift heavy weights reliably. Scorpion HK Series Brushless Motors are built from the best materials available, and are designed to provide both quality and performance at an affordable price. Scorpion starts with high quality aluminum alloy parts that are produced on the latest CNC milling machines. These parts are then gold anodized to provide a beautiful, long-lasting finish. The stators are made with high quality laminations to give maximum efficiency, and minimum Eddy current losses. The stators are epoxy coated to prevent shorts, and are wound with wire that is rated at 180 degrees C (356 F). The magnets used in Scorpion Motors are rated for operation at 200 degrees C (392 F), making a motor that is virtually impossible to burn up in normal use. Scorpion Motors are built to last, and are backed with a 2-Year warranty against defects in materials or workmanship. However, due to the high RPM of these motors, and the fact that we cannot control the installation and setup, the bearings are not covered by the 2-Year warranty, nor is any subsequent damage caused to the motor by a bearing failure. Bearings are a normal wear item, and as such, need to be maintained and changed periodically. For maximum life, make sure that a sufficient gap is left between the pinion and main gear during motor installation to avoid binding, and put a small drop of oil on each bearing every 5-6 flights. It is the responsibility of the pilot to ensure that the bearings are maintained properly. For the best overall combination of quality, performance, and value, use Scorpion Motors in your helicopter! Specifications: Stator Diameter 50 mm (1.56 in) Stator Thickness 35 mm (1.37 in) No. of Stator Arms 12 Magnet Poles10 Motor Wind 10 Motor Kv 380 KV RPM / Volt No-Load Current (IO/8.4v) 1.75 Amps Max Continuous Current 100 Amps Max Continuous Power 4800 Watts Weight 697 Grams Outside Diameter 61 mm (2.4 in) Shaft Diameter 7.98 mm (0.31 in) Body Length 66 mm (2.59 in) Overall Shaft Length 122 mm (4.80 in) Max Lipo Cell 14s


Δεν βρέθηκαν απαντήσεις
 


Πρόσθεση νέου θέματος

*
*
*

Για να εξασφαλίσουμε ότι κάποιος μη αναρμόδιος ή μια μηχανή (robot) θα συμπλήρωση τη φόρμα αυτή, παρακαλώ πληκτρολογήστε του χαρακτήρες που εμφανίζονται στο εικονίδιο.

  Redraw

Χαρακτήρες: 

  
*
  
  
*

Για να εξασφαλίσουμε ότι κάποιος μη αναρμόδιος ή μια μηχανή (robot) θα συμπλήρωση τη φόρμα αυτή, παρακαλώ πληκτρολογήστε του χαρακτήρες που εμφανίζονται στο εικονίδιο.

  Redraw

Χαρακτήρες: 

Φορτώνω...